Dell KVM 2321DS - Manual (Page 78)

62 Controlling Your System at the Analog Ports
4 Click Inlets.
5 Enter an integer in the Minimum Amps or Maximum Amps fields.
6 Click OK.
PDU Outlets window
From the Outlets window, you can select an outlet and open the Outlet
Settings window to set outlet-specific parameters.
NOTE: You can only modify outlet parameters on a PDU that is currently online.
To view/modify PDU Outlet settings:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - PDUs.
3 Complete one of the following steps:
Select a PDU name, then click Settings to open the PDU Settings window.
-or-
Select a PDU name, then press <Enter> to open the
PDU Settings
window.
-or-
Double-click on the PDU name to open the
PDU Settings window.
4 Click Outlets.
5 Complete one of the following steps:
Select an outlet, then click Settings to open the Outlet Settings window.
-or-
Select an outlet, then press <Enter> to open the
Outlet Settings window.
-or-
Double-click an outlet to open the
Outlet Settings window.
6 Select the outlet you wish to modify.
7 Complete any of the following steps:
a In the Name field, enter the Outlet name.