Dell KVM 2321DS - Manual (Page 53)

Controlling Your System at the Analog Ports 37
Selecting Devices
Use the Main dialog box to select devices. When you select a device, the
appliance reconfigures the keyboard and mouse to the proper settings for that
device.
To select devices:
Double-click the device name, EID, or port number.
-or-
If the display order of your device list is by port (Port button is depressed),
type the port number and press <Enter>.
-or-
If the display order of your device list is by name or EID number (Name or
EID button is depressed), type the first few characters of the name of the
device or the EID number to establish it as unique and press <Enter>.
NOTE: You can connect to the selected device by pressing <Enter>.
To select the previous device:
Press <Print Screen>
and then <Backspace>. This key combination toggles
between the previous and current connections.
To disconnect the user from a device:
Press <Print Screen> and then <Alt+0> or click Disconnect in the OSCAR
interface. This leaves the user in a free state, with no device selected. The
status flag on your desktop displays Free.
Soft Switching
Soft switching is the ability to switch devices using a hot key sequence. You
can soft switch to a device by pressing <Print Screen> and then typing the
(black letter) Indicates a blocked path. For instance, in
Figure 3-1, user C is viewing Forester, but is blocking access to
Acton, Barrett, and Edie, which are connected to the same
ARI port.
(blue letter) Indicates a virtual media connection.
Table 3-1. OSCAR Interface Status Symbols
Symbol Description