Dell KVM 2321DS - Manual (Page 139)

Managing Your Remote Console Switch Using the On-board Web Interface 123
Figure 6-16. SIP Version Window
4 Compare the current information to the Firmware Available field to see
the firmware upgrade available for the SIP. (You can load firmware even if
the current and available versions are the same. In some cases, you can
downgrade the SIP to an older, compatible version.)
5 Click the Load Firmware button.
6 The firmware upgrade begins. During the upgrade, a progress message is
displayed below the Firmware Available box and the Load Firmware
button will dim. When the upgrade is finished, a message appears
indicating that the upgrade was successful.
7 Repeat steps 2-6 for each individual SIP you wish to upgrade.
8 When finished, click OK.
Controlling User Status
You may view and disconnect the current active user connections using the
Status tab in the on-board web interface. You can view the session type, the
server name, or SIP to which they are connected and their system address. In
addition to disconnecting a user session, the on-board web interface also
allows one user to take control of a server currently being used by another
user. For more information, see "Preemption" on page 84.