Dell KVM 2321DS - Manual (Page 94)

78 Using the Viewer
Figure 4-9. Viewer - Thumbnail Viewer
Scan mode is a lower priority than an active connection. If you have an
interactive session with a server, that server will be skipped in the scan
sequence and the scan mode will proceed to the next server. No login error
messages will appear. Once the interactive session is closed, then the
thumbnail will be included in the scan sequence again. If another user has an
active connection to a server, the server will be skipped and a red “X” will be
displayed in the indicator light below the frame.
The Remote Console Switch Software can scan connected servers on multiple
Remote Console Switches, while the on-board web interface can only scan
connected servers on a single Remote Console Switch.
NOTE: For how to use the Remote Console Switch Software, see the Dell Remote
Console Switch Software User’s Guide or the help included with the software.