Dell KVM 2321DS - Manual (Page 73)

Controlling Your System at the Analog Ports 57
To run diagnostic tests:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Commands - Run Diagnostics. A warning message displays
indicating that all users will be disconnected.
3 Click OK to begin diagnostics.
or
Click X or press <Escape> to exit the dialog box without running a
diagnostic test.
4 All users are disconnected and the Diagnostics dialog box displays.
5 As each test is finished, a pass (green circle) or fail (red x) symbol displays.
The test is complete when the last test’s symbol displays.
Broadcasting to Servers
The analog user can simultaneously control more than one server in a system
to ensure that all selected servers receive identical input. You can choose to
broadcast keystrokes and/or mouse movements independently.
NOTE: You can broadcast up to 16 devices at a time, one device per ARI port.
Remote User Video Reports on whether a digital video channels are installed but
not working
LAN Connection Indicates whether LAN connection is active and whether
traffic has been seen since the last run of diagnostics.
On-line SIP modules Indicates the total number of currently connected and
powered SIP modules
Offline SIP modules Indicates the number of SIP modules that were connected
successfully in the past and are turned off
Suspect SIP modules Indicates the number of SIP modules that were detected, but
are either unavailable for connection or dropped packets
during the ping tests
Table 3-4. Diagnostic Test Details
Test Description