Dell KVM 2321DS - Manual (Page 54)

38 Controlling Your System at the Analog Ports
first few characters of its name or number. If you have set a Screen Delay
Time and you press the key sequences before that time has elapsed, the
OSCAR interface will not display.
To set a screen delay time:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - Menu. The Menu dialog box displays.
3 For Screen Delay Time, type the number of seconds of delay desired
before the Main dialog box is displayed after you press <Print Screen>.
4 Click OK.
To soft switch to a device:
1 To select a device, press <Print Screen>. If the display order of your device
list is by port (Port button is depressed), type the port number and press
<Enter>.
-or-
If the display order of your device list is by name or EID number (Name or
EID button is depressed), type the first few characters of the name of the
device or the EID number to establish it as unique and press <Enter>.
2 To switch back to the previous device, press <Print Screen> then
<Backspace>.
Navigating the OSCAR Interface
Table 3-2 describes how to navigate the OSCAR interface using the keyboard
and mouse.
NOTE: You can also press the <Control>, <Alt>, or <Shift> keys twice within one
second to launch the OSCAR interface. You can use this key sequence in any
place you see <Print Screen> throughout this chapter.