Dell KVM 2321DS - Manual (Page 63)

Controlling Your System at the Analog Ports 47
NOTE: Changes made to the status flag position are not saved until you click OK in
the Flag dialog box.
7 Click OK to save settings.
or
Click X to exit without saving changes.
Setting the Interface Language
You can change the OSCAR interface to any one of 4 supported languages by
selecting your chosen language in the Language dialog box.
To change the OSCAR interface language:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - Language. The Language dialog box displays.
Figure 3-6. Language Dialog Box
3 Click to select the language you want the OSCAR interface to appear in.
4 Click OK to accept the change you have made and return to the Setup
dialog box. The Setup dialog box displays in the language you have
selected.
Assigning Device Types
The Remote Console Switch automatically discovers cascaded KVM
switches, but you need to specify the number of ports on the cascaded switch
through the Devices dialog box. An Sw-8 or Sw-24 in the Type category for