Dell KVM 2321DS - Manual (Page 133)

Managing Your Remote Console Switch Using the On-board Web Interface 117
Figure 6-11. Firmware Version Window
SIPs Subcategory
The SIPs sub-category allows you to view version information. Clicking on
the EID displays a window that allows you to upgrade the SIP firmware and to
reset the SIPs if connected to a tiered switch.
Selecting the Enable Auto-Upgrade for all SIPs check box causes all
subsequently connected SIPs to have their firmware upgraded to that
available on the Remote Console Switch. This guarantees that SIP firmware
is compatible with Remote Console Switch firmware.
For information about upgrading SIPs, see "Upgrading Firmware" on
page 120.
NOTE: Reboot Required button will only appear if reboot is required.