Dell KVM 2321DS - Manual (Page 65)

Controlling Your System at the Analog Ports 49
Figure 3-8. Device Modify Dialog Box
3 Choose or enter the number of ports supported by your cascaded switch
and click OK.
4 Repeat steps 1 to 3 for each port requiring a device type to be assigned.
5 Click OK in the Devices dialog box to save settings.
Assigning Device Names
Use the Names dialog box to identify individual devices by name rather than
by port number. The Names list is always sorted by port order. Names are stored
in the SIP module, so even if you move the SIP/server to another ARI port, the
name and configuration is recognized by the switch.
NOTE: If a device is turned off, the respective SIP module does not appear in the
Names list.
To access the Names dialog box:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - Names . The Names dialog box displays.
NOTE: If the server list changes, the mouse cursor turns into an hourglass as the
list is automatically updated. No mouse or keyboard input is accepted until the list
update is complete.
NOTE: If a SIP module is not assigned a name, the EID is used as the default name.
To assign names to devices: