Dell KVM 2321DS - Manual (Page 174)

158 LDAP Feature for the Remote Console Switch
An AD user account must be configured to receive appliance administrator
permission before that account will be allowed to modify any of the fields in
the Authentication Panel. In particular, only an appliance administrator is
allowed to modify the Authentication Settings.
Active Directory Object Overview for Standard Schema
For each of the physical Remote Console Switches on the network that you
want to integrate with Active Directory for Authentication and
Authorization, you must create at least one Computer Object to represent it.
You will also need to create a computer object for each SIP attached to the
RCS that will be controlled using the “KVM User” privilege level. Computer
objects representing SIPs are not required for the Administrator level groups.
Users in the KVM User Group will only have access to SIPs that are also in the
KVM User Group. Users with Administrator privileges will have access to all
SIPs by default.
To set up the Group Objects for a Remote Console Switch:
1 If you have not already, create the Organizational Unit that will contain
the Group Objects related to your switch installation.
Configure
port settings Yes – Permission must
be configured for each
appliance by including
the appliance in the
appropriate Group
object in the Directory. Yes – Permission must be
configured for each
appliance by including the
appliance in the appropriate
Group object in the
Directory. No
Target
Device
Access Yes – Permission must
be configured for each
appliance by including
the appliance in the
appropriate Group
object in the Directory. Yes – Permission must be
configured for each
appliance by including the
appliance in the appropriate
Group object in the
Directory. Yes, if
configured by
Administrator
Permission
must be
configured for
each target
device by
including the
TD in the
appropriate
Group object
in the
Directory.