Cancel sending on a dual line, Cancel sending on a dual line -10 – Canon 700 Series User Manual
Page 107
Cancel Sending a Document
3-10
3
Sending Documents
Cancel Sending on a Dual Line
If you have installed the optional Dual-Line Upgrade Kit and both lines are in use at
the same time, and you want to select a transmission to cancel, follow this
procedure.
1
Press [Stop].
If the machine is using both lines when you press [Stop], you will be prompted on
the LCD display to select which transaction you want to cancel.
NOTE
If you are using Direct Sending, you cannot a switch the lines. You can only view
transactions for the current line being used.
2
Press [
▼
] or [
▲
] to select the transaction you want to cancel
➞
press [Set].
3
Press [ ] to cancel the transmission.
If you do not want to cancel the transmission, press
(#).
After you press
( ) to cancel the transmission, an alarm sounds, and a report
automatically prints, unless this feature has been turned ‘OFF’. (See “Report
Settings,” on p. 11-11.)
Stop
Stop