Canon 700 Series - Manual (Page 248)

Setting Up and Using PIN Codes 10-11
Other Special F
eatures
10
Setting PIN Code Access for Speed Dialing
This method enables you to register one-touch and coded speed dialing keys for
PIN code access. When a user attempts to dial with a speed dialing key, the
machine prompts the user to enter a PIN code.
If you set <NECESS. PIN CODE> of the PIN Code setting to ‘OFF’, you can
perform the procedure described below. (See “Setting a PIN Code,” on p. 10-6.)
1
Select the speed dialing location to register the telephone
number.
For details on registering the telephone number for speed dialing, see Chapter 2,
“Using Speed Dialing.”
2
If the PIN code is to be dialed before the telephone number,
press [Pin Code]
➞ enter the telephone number.
If the PIN code is to be dialed after the telephone number, enter the telephone
number before pressing [Pin Code].
3
Press [Set].
Continue registering other information for speed dialing.
4
Repeat the procedure above to continue registering PIN codes
for additional telephone numbers.
5
When you are finished registering, press [Stop] to return to
the Standby mode.
4
1
7
5
2
8
6
3
9
0
Pin Code
Set
Stop