Press [start – Canon 700 Series User Manual

Page 167

Advertising
background image

Sending a Document to a Relay Unit for Relay Broadcasting

6-14

Using a Rela

y Netw

or

k

6

6

If an ITU-T password is required to start the relay broadcast,
press [Password].

Otherwise, proceed to step 8.

NOTE

You must press [Password] within five seconds of pressing

(Set) in step 5. If

you wait longer than the timeout interval before pressing [Password], the machine
starts scanning the document. The timeout interval can be turned ‘OFF’. (See “TX
(Send) Settings,” on p. 11-14.)

\

7

Enter the ITU-T password (up to 20 digits, including , #, and
spaces) set on the other party’s machine using the numeric
keys

press [Set].

NOTE

You must enter the correct password, including , #, and spaces, set on the other
party’s machine. Otherwise, the other party’s machine cannot receive the
document.

8

Press [Start].

The machine starts the transmission.

NOTE

The machine begins scanning the documents automatically if the Timeout feature
is set to ‘ON’. (See “TX (Send) Settings,” on p. 11-14.)

Password

Set

Set

4

1

7

5

2

8

6

3

9

0

Start

Advertising