Canon 700 Series - Manual (Page 80)

Setting Up Coded Speed Dialing 2-23
2
Using Speed Dialing
● If you select ‘FIXED’:
❏ Press [▼] or [▲] to select a line ➞ press [Set].
28
If you want to select a sender name, press [ ▼ ] or [ ▲ ] until
<8.SENDER NAME> appears
➞ press [Set].
If you do not want to perform this setting, proceed to step 30.
29
Press [ ▼ ] or [ ▲ ] to select a sender name
➞ press [Set].
If you want to set up other coded speed dialing codes, repeat this procedure
from step 2.
This completes all the optional settings for a coded speed dialing code.
NOTE
To perform this setting, you had to previously register sender’s names.
30
Press [Stop] to return to the Standby mode.
➞
➞
➞
Set
Set
Set
Stop