Canon 700 Series User Manual
Page 78
Setting Up Coded Speed Dialing
2-21
2
Using Speed Dialing
20
If you experience transmission errors during long distance
sending, and want to change the long distance setting, press
[
▼
] or [
▲
] until <4.INTERNATIONAL> appears
➞ press [Set].
If you do not want to perform this setting, proceed to step 22.
21
Press [
▼
] or [
▲
] to select the desired long distance setting
➞
press [Set].
You can select ‘DOMESTIC’, ‘INTERNATIONAL (1)’, ‘INTERNATIONAL (2)’, or
‘INTERNATIONAL (3)’.
NOTE
If you experience transmission errors during long distance sending, change the
long distance setting. Select ‘INTERNATIONAL (1)’, and try to send the document
again. If this setting does not solve the problem, try settings (2) and (3).
22
If you want to change the transmission speed, press [
▼
] or [
▲
]
until <5.TX SPEED> appears
➞ press [Set].
If you do not want to perform this setting, proceed to step 24.
23
Press [
▼
] or [
▲
] to select the desired transmission speed
➞
press [Set].
NOTE
If your document transmissions are slow in starting, this may mean that the
telephone lines in your area are in poor condition. Select a slower speed. You can
select ‘33600bps’, ‘14400bps’, ‘9600bps’, or ‘4800bps’.
➞
➞
➞
➞
Set
Set
Set
Set