Canon 700 Series - Manual (Page 281)

RX (Receive) Settings 11-18
Summar
y
of Impor
tant Settings
11
6
Press [Stop] to return to the Standby mode.
An asterisk (*) indicates the default setting.
Setting Item Description
1. ECM RX
ON*
OFF
Turns the ECM (Error Correction Mode) for receiving ‘OFF’ and ‘ON’.
This switch does not affect the settings for one-touch or coded speed
dialing. (See “Using Speed Dialing,” on p. 2-32.)
All receptions are received in the ECM if the other party’s machine
supports ECM.
ECM is turned ‘OFF’.
2. RECEIVE MODE
AUTO RX
MANUAL RX
Switches the Receive mode between Automatic Receive mode and
Manual Receive mode. (See Chapter 4, “Receiving Documents.”)
Sets the machine to the Automatic Receive mode.
Sets the machine to the Manual Receive mode.
3. REMOTE RX
ON*
REMOTE RX ID
OFF
Enables you to receive documents from a remote telephone. (See
“Changing the Remote Receive ID,” on p. 4-7.)
Remote receiving is turned ‘ON’, and you can set the Remote
Receive ID (from 00 to 99); 25*.
You can change the Remote Receive ID.
Remote receiving is turned ‘OFF’.
4. RX PAGE FOOTER
OFF*
ON
Prints a footer in the lower right corner on every received page. The
footer contains the date, day, time received, transaction number, and
page number. (See “What Is Sender Information?,” on p. 1-17.)
No RX footer prints at the bottom of the page.
An RX footer is printed at the bottom of every page you receive.
5. 2 ON 1
OFF*
ON
Prints two pages of a received document on one sheet of paper.
The 2 on 1 printing feature is turned ‘OFF’.
The 2 on 1 printing feature is turned ‘ON’.
Stop