Canon 700 Series - Manual (Page 74)

Setting Up Coded Speed Dialing 2-17
2
Using Speed Dialing
9
Enter a name (up to 16 characters long) using the numeric
keys
➞ press [Set].
For more information on how to enter names, see “Entering Names for
Registration,” on p. 1-13.
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
This completes the minimum settings for registering a coded speed dialing code.
● To stop here and register another code:
❏ Press [Data Registration] ➞ repeat the procedure from step 5.
● To end the procedure and return to the Standby mode:
❏ Press [Stop].
10
Press [ ▼ ] or [ ▲ ] until <3.OPTIONAL SETTING> appears
➞
press [Set].
11
Press [ ▼ ] or [ ▲ ] to display <ON>
➞ press [Set].
12
If you want to set an access code, press [ ▼ ] or [ ▲ ] until
<1.ACCESS CODE> appears
➞ press [Set].
If you do not want to perform this setting, proceed to step 14.
➞
➞
➞
➞
4
1
7
5
2
8
6
3
9
0
Set
Data
Registration
Stop
Set
Set
Set