Canon 700 Series - Manual (Page 212)

Transferring Documents 9-7
9
Special Sending/Receiving F
eatures
2
If you have registered a password, enter your password using
the numeric keys
➞ press [Set].
The Transfer mode is turned ‘OFF’, and the machine returns to the Standby
mode.
Changing the Transfer Settings
Follow this procedure to change settings in the transfer setup file.
1
Open all three one-touch speed dialing panels
➞ press [Data
Registration]
➞ [▼] or [▲] until <3.FAX SETTINGS> appears ➞
press [Set].
If necessary, see steps 1 to 3 of “Setting Up the Machine for Document Transfer,”
on p. 9-3.
2
Press [
▼] or [▲] until <6.FILE SETTINGS> appears ➞ press
[Set]
➞ [▼] or [▲] until <5.TRANSFER> appears ➞ press [Set].
If necessary, see steps 4 and 5 of “Setting Up the Machine for Document
Transfer,” on p. 9-3.
3
Press [ ▼ ] or [ ▲ ] until <2.CHANGE DATA> appears
➞ press
[Set].
If you have not previously set a password, proceed to step 5.
➞
➞
4
1
7
5
2
8
6
3
9
0
Set
Set
Data
Registration
Set
Set