Canon 700 Series - Manual (Page 284)

Printer Settings 11-21
Summar
y
of Impor
tant Settings
11
An asterisk (*) indicates the default setting.
Setting Item Description
3. RX REDUCTION
ON*
OFF
1. RX REDUCTION
AUTO SELECTION*
FIXED REDUCTION
2. SELECT REDUCE DIR
VERTICAL ONLY*
HORIZ & VERTICAL
Receives document images at a reduced size.
Turns ON image reduction.
Turns OFF image reduction.
The machine automatically reduces the image to the selected
paper size.
You set the reduction percentage (75%, 90%*, 95%, or 97%).
Select the direction of the reduction based on the fixed reduction
percentage selected above.
Reduction percentage is performed in the vertical direction only.
Reduction percentage is performed in both the horizontal and
vertical directions.
4. TONER SUPPLY LOW
RX TO MEMORY*
KEEP PRINTING
Sets the machine to continue printing when the message
<TONER SUPPLY LOW> appears.
The machine stops printing, and receives the remainder of the
document in memory. To print the document, replace the toner
cartridge and follow the procedure to print the documents
received in memory. (See “When the Machine Displays
<RECEIVED IN MEMORY>,” on p. 9-15.)
Ignores the warning message, and keeps printing the document.
This setting is convenient when a new toner cartridge is not yet
available. However, if the toner cartridge is out of toner, the
machine does not receive the document in memory. You must
install the new toner cartridge, and set ‘RX TO MEMORY’.