Canon 700 Series - Manual (Page 258)

Setting Up and Using the Optional Stamp Feature 10-21
Other Special F
eatures
10
Turning the Stamp Feature ON/OFF
If you have set TX STAMP to ‘TX STAMP ON’, documents are stamped according to
the setting made in the STAMP ACTION menu.
Follow the procedure below to temporarily turn OFF the TX STAMP feature.
1
Place your documents on the machine.
For instructions explaining how to place your documents, see “Setting the
Document on the Machine,” on p. 3-3.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
“Adjusting the Scan Settings,” on p. 3-4.)
• You can also specify a sender’s name with [TTI Selector]. (See “Selecting a
Sender’s Name,” on p. 3-6.)
2
Open all three one-touch speed dialing panels
➞ press [Stamp
(Option)].
3
If you do not want to stamp document pages, press [ ▼ ] or [ ▲ ]
to display <TX STAMP OFF>
➞ press [Set].
If you want to turn the stamp feature ON, select <TX STAMP ON>.
4
Close all three one-touch speed dialing panels
➞ continue the
procedure for sending the document.
➞
Stamp
(Option)
Set