Canon 700 Series User Manual

Page 75

Advertising
background image

Setting Up Coded Speed Dialing

2-18

2

Using Speed Dialing

NOTE
• If you want to use access code dialing, you have to register an access code (from

two to five digits) that represents the telephone number you are registering for
coded speed dialing.

• To use access code dialing, you need to set ACCESS CODE to ‘USE’ from the

SYSTEM SETTINGS menu, and set up the access code key. (See “Setting Up the
Access Code Key,” on p. 2-29.)

13

Enter an access code (from two to five digits) using the
numeric keys

press [Set].

14

If you want to set the time for the transmission, press [

] or

[

] until <2.TX TIME SETTNG> appears

press [Set].

If you do not want to perform this setting, proceed to step 18.

NOTE
• You can set up to five different times in a 24-hour period for sending.

• If you set the timer for a coded speed dialing code, every document you send using

this code is sent at the same time everyday.

15

Press [

] or [

] to select a preset time number (1 to 5)

press

[Set].

16

Enter the time in 24-hour notation using the numeric keys
(e.g., 1:00 p.m. as 13:00)

press [Set].

The message <DATA ENTRY OK> appears on the LCD display for a few seconds.

4

1

7

5

2

8

6

3

9

0

Set

Set

Set

Set

4

1

7

5

2

8

6

3

9

0

Set

Advertising