Basic operations, Camera recording – Sony CCD-TR910 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic operations
Camera recording
Make sure that the power source is installed, a cassette is inserted and that the START/
STOP MODE switch is set to K. Before you record one-time events, you may want to
make a trial recording to make sure that the camcorder is working correctly.
When you use the camcorder for the first time, power on it and reset the date and time
to your time before you start recording, (p.57)
The date is automatically recorded for 10 seconds after you start recording
(AUTO
DATE feature
—CCD-TR710 only' 'This feature works only once a day.
To save battery power, the picture in the viewfinder appears only when you bring your
face close to the viewfinder with STANDBY up
(Finder power save).
(1)
While pressing the small green button on the POWER switch, set it to CAMERA.
(2)
Turn STANDBY up.
(3)
Press START/STOP. The camcorder starts recording. The "REC" indicator appears
and the red lamp lights up in the viewfinder. The camera recording/battery lamps
located on the front of the camcorder also lights up.
The AUTO DATE indicator appears. (CCD-TR710 only)
STBY
0
:
00:00
40minS
10