To eject the cassette, To prevent accidental erasure, Inserting a cassette – Sony CCD-TR910 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a cassette
Make sure that the power source is installed.
When you want to record in the Hi8 system, use Hi8 video cassette
Hi0
(CCD-TR910
only).
(1)
While pressing the small blue button on the EJECT switch, slide it in the direction of
the arrow. The cassette compartment automatically lifts up and opens.
(
2
)
Insert a cassette with the window facing out.
(3)
Close the cassette compartment by pressing the "PUSH" mark on the cassette
compartment. The cassette compartment automatically goes down.
To eject the cassette
While pressing the small blue button on the EJECT switch, slide it in the direction of the
arrow.
To prevent accidental erasure
Slide the tab on the cassette to expose the red mark. If you insert the cassette with the
red mark exposed and close the cassette compartment, the beeps sound for a while. If
you try to record with the red mark exposed, the 12^ and ^ indicators flash in the
viewfinder, and you cannot record.
To re-record on this tape, slide the tab back out covering the red mark.