To correct the date and time setting, To check the preset date and time, The year changes as follows – Sony CCD-TR910 User Manual
Page 57: Note on the time indicator, Resetting the date and time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the date and time
You can set the date and time in the menu system.
(1) Press MENU to display the menu in the viewfinder.
(Z)Turn the control dial to highlight CLOCK SET, and press the control dial to select it.
(3)
Turn the control dial to adjust the year, and then press the control dial.
(4)
Set the month, day, hour, and minutes by turning the control dial and then pressing
the control dial.
(5)
Press MENU to erase the menu display.
To correct the date and time setting
Repeat the above procedure.
To check the preset date and time
Press DATE to display the date indicator in the viewfinder.
Press TIME to display the time indicator.
When you press the same button again, the indicator goes off.
The year changes as follows:
1997 -- ---------
1996
L_
2029
Note on the time indicator
The internal dock of this camcorder operates on a 12-hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands for noon.
57