Remote commander, 2] time code write button (ccd-tr910 only) (p.51), Tape transport buttons (p.l7) – Sony CCD-TR910 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Commander
The buttons that have the same name on the Remote Commander as on the camcorder
function identically.
RMT-715 (for CCD-TR910)
RMT-708 (for CCD-TR710)
Q] COUNTER RESET button (CCD-TR910
only)
(p.l2,41,46)
[2] TIME CODE WRITE button (CCD-TR910
only)
(p.51)
Point toward the remote sensor to control
the camcorder after turning on the
camcorder.
H] START/STOP button
(p.lO)
m INDEX ERASE (CCD-TR910 only)
(p.50)
111]
Power zoom button
(p.l3)
m INDEX SEARCH button (CCD-TR910 only)
(p.49)
m
DISPLAY button
(p.l8)
m
index
mark
(p.47)
g] DATE SEARCH button (CCD-TR910 only)
(p.44)
Tape transport buttons
(p.l7)
[6] DATA CODE button (CCD-TR910 only)
(p.l9)
[7]
ZERO MEM button (CCD-TR910 only)
(p.41, 46)
To prepare the Remote Commander
To use the Remote Commander, you must insert two size AA (R6) batteries. Use the
supplied size AA (R6) batteries.
(1) Remove the battery cover from the Remote Commander.
(2)
Insert both of the size AA (R6) batteries with correct polarity.
(3)
Put the battery cover back onto the Remote Commander.
75