To scan the beginning of all days, To stop searching or scanning, To view pictures during searching or scanning – Sony CCD-TR910 User Manual
Page 45: Notes on date search and date scan mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To scan the beginning of all days
(1)
Set the POWER switch to VTR. The tape transport buttons light up.
(2)
Press DATE SEARCH on the Remote Commander twice.
(3)
Press or Date Scan starts.
>
a
a
O
To stop searching or scanning
Press one of the following tape transport buttons: O, O, or
To view pictures during searching or scanning
Press O and then press or
Notes on Date Search and Date Scan mode
• If a day's recording is not longer than 2 minutes, the camcorder may not accurately
find its boundaries.
• Date Search and Date Scan do not function on a tape recorded by a camcorder without
the Data Code function. Your camcorder has the Data Code function.
45