To search for the beginning of a specific date – Sony CCD-TR910 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching the boundaries of recorded date
(CCD-TR910 oniy)
You can search for the boundary between recording dates using the Date Code
automatically recorded on the tape.
There are two modes;
•
Searching for the beginning of a specific date, and playing back from there
(Date
Search)
• Searching for the beginning of all days, one after another, playing back about 10
seconds of each
(Date Scan)
JUL.4 1996
DEC.31 1996
Each time you press DATE SEARCH, the mode changes as follows:
Date Search -> Date Scan -» nothing
Î____ ____ __ ___ J
To search for the beginning of a specific date
(1)
Set the POWER switch to VTR. The tape transport buttons light up.
(2)
Press DATE SEARCH on the Remote Commander.
(3)
When the current position is
[b],
press to search towards
[a]
or press ► ► to
search towards
[c].
44