To stop recording, Recording from a vcr or tv – Sony CCD-TR910 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording from a VCR or TV
You can record a tape from another VCR or a TV program from a TV that has audio/
video outputs. Connect the camcorder to the VCR or TV.
(1)
While pressing the small green button on the POWER switch, slide it to VTR.
(2)
Press REC • and the button on the right together at the point where you want to
start recording.
In recording and recording pause mode, S VIDEO (CCD-TR910 only) and VIDEO/
AUDIO jacks automatically work as input jacks.
AUDIO OUT
-; Signal flow
If your VCR or TV is a monaural type, connect only the white plug for audio on both
the camcorder and the VCR or TV.
If you are going to connect the camcorder using the S video cable (not supplied) [a], you
do not need to connect the yellow (video) plug of the A/V connecting cable
[b]
(CCD-
TR910 only).
To check the picture from a VCR or TV before recording
Press
I I
after pressing •. You can check the picture in the viewfinder.
To stop recording
Press □.
54