1 tape transport buttons (p.l7), Gì] camera recording/battery lamp (p.lo), Gh microphone – Sony CCD-TR910 User Manual
Page 74: To enter demo mode, To exit demo mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
§1 Tape transport buttons
(p.l7)
□ STOP (stop)
■ 4^ REW (rewind)
O PLAY (playback)
► ► FF (fastforward)
II PAUSE (pause)
• REC (recording)
M
EDITSEARCH button
(p.l5)
Remote sensor
(p.76)
Aim the Remote Commander here for
remote control.
gì]
Camera recording/battery lamp
(p.lO)
gH Microphone
g3j
Lighting aperture
(p.l4)
ggj
Lens cover
(p.lO)
gsj
Tripod receptacle
(p.l4)
gi
Lithium battery compartment
(p.56)
To watch the demonstration
You can watch a brief demonstration of pictures with special effects. If the
demonstration appears when you turn on the camcorder for the first time, exit the
Demo mode to use your camcorder.
To enter Demo mode
(1) Eject the cassette and set the POWER switch to OFF.
(2)
Turn STANDBY up.
(3)
While holding down O, set the POWER switch to CAMERA. The demonstration
starts. The demonstration stops when you insert the cassette.
Note that once you enter Demo mode, this mode is retained as long as the lithium
battery is in place. Therefore, demonstration starts automatically 10 minutes later every
time you set the POWER switch to CAMERA, and after you eject the cassette.
To exit Demo mode
(1)
Set the POWER switch to VTR.
(2)
Tum STANDBY up.
(3)
While holding down □, set the POWER switch to CAMERA.
DEMO OFF appears in the viewfinder.
74