Note on indicator, Before editing, Editing onto another tape – Sony CCD-TR910 User Manual
Page 52: Rasa, Srasa
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Writing the RC Time code on a recorded tape (CCD-TR910
only)
Note on
indicator
The
indicator appears during playback if;
• nothing is recorded.
• the RC time code is unreadable because of the damage of the tape or because of the
noise.
• you recorded using another VCR without RC time code function.
Editing onto another tape
You can create your own video program by editing with any other O 8 mm, Hi0 Hi8,
M
VHS,
sm
S-VHS,
rasa
VHSC,
srasa
S-VHSC, ra Betamax or
B3
b
^
ED Betamax
VCR that has video/audio inputs.
Before editing
Connect the camcorder to the VCR as described in "Connections for playback" on page
16
.
Set the input selector on the VCR to LINE, if available.
(1) While pressing the small green button on the POWER switch, slide it to VTR.
(2)
Set EDIT to ON in the menu system.
52
: Signal flow