Pilot lamp and test firing, Check the pilot lamp, Press the pilot lamp (test firing button) – Canon MR-14EX User Manual
Page 16: Flash exposure confirmation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pilot Lamp and Test Firing
This tests whether the Macro Ring Lite can fire a flash.
Check the Pilot lamp.
• When the flash is ready, the Pilot
lamp will light.
Press the Pilot lamp (test firing
button).
► A flash will fire.
• The Pilot lamp is also a test firing
button.
Q • A test flash cannot be fired after you press the camera's shutter button halfway
and the camera metering is still active for (56 ).
• If the Macro Ring Lite is in the SE mode, pressing the test firing button turns on
the Macro Ring Lite.
Flash Exposure Confirmation
When a correct flash exposure has
been obtained, the flash exposure
confirmation lamp lights in yellow-
green for 3 sec. immediately after the
flash fires.