Canon MR-14EX - Manual (Page 38)

M Manual Flash Mode
In the manual flash mode, you can set the flash output from 1/1 (full) to 1/64
power in whole-stop increments. The flash tubes can be fired in one of three
configurations: 1. Fire both flash tubes at the same output, 2. Fire flash tube
A at a different output from flash tube B, 3. Fire oniy one of the flash tubes.
Firing Both Fiash Tubes at the Same Output
Set the camera’s shooting mode
to Av or M.
Press the MR-14EX’s <MODE>
button and select M.
► Pressing the <MODE> button
toggles the flash mode between
ETTL and M.
-►ETTL ►M —
M
\ I /
- i / H -
/ I
;iBf-C.Fn MgDE + —
5
6
Press the <SELysET> button.
► The flash output display blinks.
Press the < + > or <—> button to
set the desired flash output.
► Each time you press the button, the flash
output increases or decreases by one stop.
Press the
< sel 7SET>
button again.
► The flash output Is displayed.
Set the camera’s aperture.
7 Focus and take the picture.
• Check that the
i
icon (flash ready) is
displayed in the viewfinder before
taking the picture.
0 To determine the correct flash exposure, use a hand-held flash meter or take test shots.
38