Feb (flash exposure bracketing), Press the <sel/set> button and select – Canon MR-14EX User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
%FEB (Flash Exposure Bracketing)
You can change the flash exposure level automatically while keeping the
background exposure level the same. Three flash shots can be bracketed
up to ±3 stops in 1/3-stop increments (or 1/2-stop increments with some
cameras) as follows: Correct exposure, decreased exposure, and
increased exposure. FEB is canceled automatically after all three
bracketed flash shots are taken.
Correct exposure. Decreased exposure by 1 stop. Increased exposure by 1 stop.
Press the
<
sel
/
set
>
button and
select
► Pressing the <SELySET> button changes
the blinking selection in the following loop:
-------- (OFF)^--------
► The ^ icon and flash exposure
bracketing amount will blink.
Press the < -
h
> or <—> button to
set the flash exposure bracketing
amount.
58