Focusing lamp, Press the < lamp >button, Focus the subject – Canon MR-14EX User Manual
Page 20: Resetting to the defauit settings, Press the camera’s <clear> button, Focusing lamp resetting to the default settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focusing Lamp
In low-light or when the viewfinder image gets darker at high magnifications, it
becomes difficult to achieve correct focus. In such cases, the focusing lamp
can assist with focusing.
1
Press the < LAMP >button.
► The focusing lamps on the top and
bottom of the flash ring will light for
about 20 sec.
Focus the subject.
Press the <LAMP>button.
• To turn off the focusing lamps, press
the < LAMP> button again.
Resetting to the Defauit Settings
When the Macro Ring Lite is attached to an EOS camera equipped with a
<CLEAR> button, pressing the <CLEAR> button resets the Macro Ring Lite’s
settings (except the Custom Functions) to its default settings
1
Press the camera’s <CLEAR>
button.
• The default settings are as follows:
► E-TTL autoflash*
Left and right flash tubes firing at the
same output
Normal flash
*
With the EOS-1 N and EOS-1, TTL autoflash
will be set.
20