Canon MR-14EX - Manual (Page 47)

Using the Wireless Flash System
Features Available with Wireless Flash
The following features can also be used in a wireless flash system:
■ Wireless FE Lock
■ Wireless flash exposure compensation
■ Wireless flash exposure bracketing (FEB)
■ Wireless high-speed sync (FP flash)
a
• To set the above features, see pages 30 to 37.
• You set all the above features with the master unit. You need not touch the
slave unit’s controls.
Wireless Manual Flash
With all Type-A cameras, you can also set up a wireless manual flash
system.
Setting the flash output for flash tubes A and B and slave C
With GHiB A : B : c displayed on the master unit, set the flash output for
flash tubes A and B. Then set the flash output for slave C. For the setting
procedure, see “Firing Both Flash Tubes at a Different Output” on page 39.
0 To determine the correct flash exposure, use a hand-held flash meter or take
test shots.
With all Type-A cameras, C.Fn-5 can set the same flash output for flash
tubes A and B and slave C. (-^p.64)
• While
unum
is not displayed on the master unit, you can just set the flash
output with the master unit.
47