M manual flash mode, Set the camera’s shooting mode to av or m, Press the mr-14ex’s <mode> button and select m – Canon MR-14EX User Manual
Page 60: Press the <sel/set> button, Press the <sel/set> button again, Set the camera’s aperture, Focus and take the picture, Manual flash mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
M Manual Flash Mode
In the manual flash mode, you can set the flash output from 1/1 (full) to 1/64
power in whole-stop increments. The flash tubes can be fired in one of three
configurations: 1. Fire both flash tubes at the same output, 2. Fire flash tube
A at a different output from flash tube B, 3. Fire only one of the flash tubes.
Firing Both Fiash Tubes at the Same Output
Set the camera’s shooting mode
to Av or M.
Press the MR-14EX’s
<MODE>
button and select M.
► Pressing the
<MODE>
button
toggles the flash mode between
ttl
and M.
I------
► TTL
------ ^
M
---------- 1
Press the
<
sel
/
set
>
button.
►
The flash output display blinks.
Press the < -i- > or <—> button to
i set the desired flash output.
►
Each time you press the button, the flash
output increases or decreases by one stop.
Press the
<
sel
/
set
>
button again.
►
The flash output is displayed.
Set the camera’s aperture.
Focus and take the picture.
• Check that the 4 Icon (flash ready) is
displayed in the viewfinder before
taking the picture.
S
To determine the correct flash exposure, use a hand-held flash meter or take test shots.
60