Firing only one flash tube – Canon MR-14EX User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Flash Tube
Firing Only One Flash Tube
Follow the same procedure as for “Firing Both Flash Tubes” except for step
2. For step 2, follow the operation below.
Press the < O > or < l> > button to
move the bar
h
all the way to the
left or right to the -:iD or di:- icon,
• -:ID: Fires only flash tube A @
a
)
CK-: Fires only flash tube B (Bg
The flash ratio can be adjusted only with the EOS-1 D, IV, 3, D30, ELAN 7E/30,
and ELAN 7/33 cameras. With other Type-A cameras, the flash ratio will be fixed
at 1:1 for both flash heads. You can also fire only one of the flash heads.
• Pressing the < RATIO > button will not display the hfiSiTg icon and flash ratio.
Selecting -:«) or d>:- will fire only one of the flash tubes. When both -:iD dK Icons
are displayed, both flash tubes will fire at the same output.
28