AVer EXR5016_series user manual - Manual (Page 101)

93
Chapter 6 Using the Remote Programs
User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature,
make sure that your PC and DVR server both are connected to the internet and the Network feature is enabled.
Accessing this feature for the first time you will be prompted by your browser to install WebCamX.cab, allow the
installation and you should be able to connect and login afterwards.
For Windows 2000, click Yes when the Security Warning dialog box appears.
For Windows XP/Vista/7, click Install when the Internet Explorer - Security Warning dialog box appears.
After installing the WebCamX.cab and when connecting to the DVR system, you are required to enter account ID
(default is superuser; case sensitive) and password (default is 111111) and select the type of network.
Superuser account has the authority to remote setup the DVR system configuration on WebViewer.
Non-superuser account only can preview the video on WebViewer and Remote Console.
i
Changing account password is strongly recommended.
i
To have smooth remote frame rate, it ’s suggested to connect DVR by selecting WAN (512K/64K) as the Network
Type on WebViewer.