AVer EXR5016_series user manual - Manual (Page 106)

98
6.1.1.2 Camera Setting
Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Update to
save and apply the new settings, click Exit to exit without saving.
IP Camera Setting
i
EH5108/EH5108H/EXR5008 series only has 8 channels will be available.
(1)
(2)
(3)
(4)
(5)
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable the ALL check
box. To select more than one camera, Right click on the camera icon. To select one camera only, Left click on the
camera icon. The camera icon turns red when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest disabling it
so that the system won’t detect it as video loss error.
(3) Input
Select the type of camera as IP camera. For General camera setting, see Analog Camera Setting . To modify
camera of remote DVR, see Remote DVR Camera Setting .
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
- Enable Audio
Enable/disable audio of the camera.
- Name
Change the camera name
i
DVR supports Chinese characters but only can be entered in remote site (remote setup).
- Description
Add a short comment