AVer EXR5016_series user manual - Manual (Page 55)

47
Chapter 3 Customizing the DVR System
In the Preview screen mode, click button to customize your DVR. When the DVR configuration setup
selection appears, select and click the buttons you want to change the setting.
3.1 System Setup
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(11)
(12)
(13)
(14)
(9) (10)
(1) Storage Path
Set the HDD on where to save the data. In case you have more than one storage device, the system
automatically saves the data to the next storage device. To insert another storage device, click Add and select
the storage path. To remove the selected path, click Delete.If the hard disk is the first time for DVR system,
please format the hard disk before starting to use it. To format the hard disk, select the hard disk and Format
Type, and then, click Format button.
i
- Before formatting hard disk, please stop all operations on DVR system.
- While formatting hard disk, the CPU usage will be near to 100% and might slow down the DVR
system response.