AVer EXR5016_series user manual - Manual (Page 56)

48
(2) Delete recorded data after
If you want the system to automatically erase the data after a certain days, enable the Delete recorded data
after check box and enter the number of days in Days text box.
(3) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log after a certain days, enable the Delete
event and alarm log after check box and enter the number of days in Days text box.
(4) Overwrite Enable
When there is not enough free space to record one hour data, the system automatically replaces the oldest
data.
(5) Language
Customize the system to display the tool tips and dialogs based on the selected language. Default language is
in English.
(6) Video Standard
Change and select the proper video system according to your camera video system. If the video system setting
is wrong, the video would appear abnormal.
(7) Configuration
Backup a copy of all the settings and allows you to regain the same settings back. To save the current settings,
click Export. To replace the settings with the one you have saved, click Import.
i
Please plug the USB pen drive to DVR server before Import or Export the configuration from or to USB pen
drive.
(8) Spot Monitor
Select the camera user wants to display on spot monitor or select All for all cameras. Mark Autoscan
to enable display to take turns automatically.
(9) Touch Monitor
When DVR server is connected with touch monitor, user needs to adjust touch monitor in order to work
normally.
1. Connect the touch monitor with DVR server.
2. Turn on the DVR server and touch monitor power.
3. Select Setup → System → Touch Monitor → Adjust.
4. The adjusting window will show up.