AVer EXR5016_series user manual - Manual (Page 50)

42
Name Function
(5) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded
video file.
i The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the
camera ID. The blue colored column indicates that there is a recorded video file on that period of time. While the
red colored column indicates on where to start playing the recorded video file.
(6) Preview Switch to Preview mode.
(7) Playback Switch to Playback mode. This allows you to view the recorded video file.
(8) Status bar Display the recorded date, time and play speed.
(9) Camera ID Show the number of cameras that are being viewed. When you are in single screen mode, click
the camera ID number to switch and view other camera.
(10) Export Export includes Snapshot, Output Video Clip, and Backup function.
Snapshot: Capture and save the screen shot either in *.jpg format.
Output Video Clip: Save the segmented file in *.dvr format to external USB storage device
(see also
Chapter 2.3.1 ).
Backup: Save the playback file to USB device or DVD-ROM disk(see also Chapter 3.6 )
i
Please plug the USB pen drive to DVR server before execute Export function (Snapshot, Output Video Clip, and
Backup).
(11) Segment Keep a portion of the recorded video (see also Chapter 2.3.1 ).
(12) Full screen View in full screen. To return, press the right button of the mouse or ESC on the keyboard or click
the arrow icon.
Click to exit from
full screen mode
When you switch to full screen in multiple-screen mode, Left click to toggle to only display one of
the video in the multiple-screen mode or all.
(13) Event log Show the record of activities that take place in the system. To filter the records, select and click the
option button to only display Event, System, Operation, Network or All.
(14) Bookmark Mark a reference point when reviewing the recorded video file to which you may return for later
reference (see also
Chapter 2.3.2 ).
(15) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second(also see Chapter
2.3.3 )
(16) Find Next
Search for the next event. You can use this when you are using Event Search function.
(17) Event Search Search from the recorded activities that were recorded in event log (i.e., Sensor, Motion, Video
Loss)
. (see also Chapter 2.3.4 )
(18) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless
picture and #2, if it captures lots of movement.