AVer EXR5016_series user manual - Manual (Page 61)

53
(5) IP Camera Information
To setup IP camera and display current IP camera information.
Using IP Camera Motion: Enable to use the motion detection function of IP camera if the IP camera has
support motion detection and the motion recording will based on IP camera ’s motion detection setting.
IP Setting: Click Add IPCam to add the IP camera.
1. Click the radio button of Protocol to start setup IP camera. If use doesn ’t know any IP cam protocol,
click Auto Search button to find the IP cameras that can be detected on your LAN network; not all IP
camera on your LAN network can be found.
For supported IP camera list, please refer to the IP camera support list from AVerMedia web site.
2. Select the Protocol, Model, Video Format, and Channel of the IP camera.
3. Enter IP address and connecting port in IP Camera Site column.
4. Also, user can enter URL of IP camera instead of IP address.
5. If the IP camera has authority request, please enable Authentication and enter ID and Password.
6. Click OK to connect with the IP camera.
Display the
firmware version
of IP camera that
user has selected.