AVer EXR5016_series user manual - Manual (Page 159)

151
Chapter 8 Using the Web Tools
The bundled Web Tools includes Dispatch Server, Remote Backup, and Remote Setup program. To install Web
Tools, place the CD into the CD-ROM drive then click Install Web Tool.
8.1 Dispatch Server
Dispatch is designed to reduce the network traffic of the DVR server. Instead of connecting directly to the DVR
server, the client can connect to the computer that is connected to the DVR server using the Dispatch program.
i To have better remote live and playback performance, it’s suggested to connect DVR to Dispatch Server in LAN
environment only.
8.1.1 To Run Dispatch program
1. Make sure you are connected to the internet.
2. Click Start>Programs>DSS>Tool>Dispatch.
3. In the DVR Server section, enter the NV DVR server IP, port, user
ID and password. You can also select to display the language you
prefer.
4. Auto connect when start
Enable to automatically connect the dispatch server when start
up
5. 3GPP Service
Enable to allow user using 3GPP service to receive video stream
from Dispatch server. The Service Port must same as RTSP
port of 3GPP on DVR server.
6. In the Dispatch Service section, if you have installed more than
one network card, select the Service IP number.
7. In the Dynamic DNS Configuration section, enter the DNS
server Name and Password. The DNS server can be the remote
storage server for sharing the DVR system loading.
8. Click START to connect.