AVer EXR5016_series user manual - Manual (Page 49)

41
2.3 Familiarizing the Buttons in Playback Mode
To switch in Playback mode, click Playback button at the lower right corner of Preview mode user interface.
EH5216/EH5216H series UI
Name Function
(1) Split Screen
Mode
Select from 6 different split screen type to playback the recorded video file of all the cameras or
one camera over the other or alongside on a single screen.
i – When you are in single screen mode, Right click and Drag a square on the area you want to enlarge.
Right-click on the screen again, the screen view will back to normal view.
– When you are in full screen mode, partial enlarges does not support.
– If there are only 8 cameras, you won’t be able to switch to 13 and 16 split screen mode.
(2) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the
track. When in single screen mode, the progress bar green color means motion recording file, blue
color means general (always) recording file, and yellow color means video loss.
(3) Hour Buttons Select and click to playback the recorded video file on the specific time frame.
i The Hour buttons represent the time in 24-hour clock. The blue bar on top of the hour button indicates that there
is a recorded video file on that period of time. While the red bar indicates that you are currently viewing the
recorded video file.
(4) Playback
Control Buttons
Begin: Move at the beginning of the recorded video file.
Previous: Go back to the previous frame.
Slower: Play the recorded video file at the reduce speed from 64x, 32x, 16x, 8x, 4x, 2x, 1x, 1/2X,
1/4X.
Rewind: Wind back the recorded video file.
Pause: Briefly stop playing the recorded video file.
Play: Play the recorded video file.
Faster: Play the recorded video file at the speed of 2x, 4x, 8x, 16x, 32x, or 64x.
Next: Go to the next frame.
End: Go to the end of the recorded video file.