Salter Brecknell 650 - Manual (Page 16)

16
counting.
NOTE 4: If using the remote QWERTY keyboard, use the ENTER key from the
remote keyboard for Product ID.
FIGURE 4-1: Item ID List Screen
4.2.2 ADDING A NEW ITEM ENTRY
1. Sample the new item or enter its APW into the scale as previously described.
2. Press the Item ID soft key. The scale prompts for the Item ID number. See FIGURE 4-2
3. The Product ID field is highlighted. If you want to enter a Product ID
a. Press the Edit soft key. You will see a flashing cursor.
b. Use the scale keyboard or optional QWERTY keyboard to enter the Product ID.
See TABLE 4-1: Entering Alphanumeric Characters
c. Press the ENT key.
4. Press the Done soft key. The scale confirms that you wish to save the changes.
5. Press the Yes soft key to save the changes.
NOTE: You may instead choose to download an item ID database from a PC. See separate
manual. If using the remote QWERTY keyboard, use the ENTER key from the remote
keyboard for Product ID and Name. Use the ENT keyboard from the scale for the other
fields.
4.2.3 EDITING AN ITEM ENTRY
1. Press the Item ID soft key. The scale prompts for the Item ID number.
2. Press the List soft key to edit by Item ID (see note 1) or press the Product ID key (see note
2) to edit by Product ID.
3. Key-in the sequential four digit Item ID number and press the ENT key. The scale
automatically recalls the stored information.
NOTE 1: If you do not know the four digit Item ID number, press the LIST soft
key. The scale displays the screen shown in Figure 4-1. Four Item Ids are shown
for each screen. Use the up/down arrow soft keys to move within the four Item
Ids shown. Use the PgUp and PgDn soft to recall additional groups of four Item
Ids. If your list of Item Ids is long, press the ENT key and the scale prompts
“Input Item ID:” Enter the starting Item Id number and the list will begin with that
number
NOTE 2: If you wish to key in the Product ID rather than the sequential Item ID,