Salter Brecknell 650 - Manual (Page 30)

30
5.5.5 LABEL - Allows six label formats to be downloaded from WYSIWYG
software and also allows selection of the label.
5.5.5.1 – Download label format from PC
1. Press the DnLoad soft key
2. Scale prompts “ Select Index to Download.”
3. Press a soft key 1 – 6 to store the label format and press ENT
4. Scale prompts “Ready to Download Ent – Save CLR - cancel”
5. Use test print from PC to download a formatted label.
6. Press ENT to accept label. Scale prompts “FMT SIZE = xxx” where xxx is the file size.
A test label is automatically printed. Each of the six label registers is limited to a
maximum of 10K bytes for a file size.
7. See table 5.6 for a list of the scale fields available to print. Other data may be included
on the label as fixed text.
COMMAND FUNCTION
%GR Prints GR followed by Gross Weight
%NT Prints NT followed by Net Weight
%APW Prints APW followed by Average Piece Weight
%TR Prints TR followed by Tare Weight
%PC Prints PC followed by Number of Pieces
%DATE Prints the current date from the 650
%TIME Prints the current time from the 650
%IX Prints IX followed by the Item ID (1 – 2000)
%ID Before printing, the 650 will prompt for entry of a Product ID. IT then
prints ID followed by the Product ID entered
%PN Before printing, the 650 will prompt for entry of a Product Name. It then
prints PN followed by the Product Name entered
%CH Prints CH followed by the scale channel (1 or 2)
%LOT# Before printing, the 650 will prompt for entry of a Lot #. It then prints
LOT# followed by the lot number entered.
TABLE 5-7: Print commands for formatting a label with WYSIWYG software
5.5.6 Deflt
1. Pressing the Deflt soft key changes the selected label format to the default label.
2. Use the clear key to move back to other menus. See appendix 2 figure B4 for label
example.
5.6 DIAGNOSTICS SUB-MENU (Diag)
The Diagnostics sub-menu allows you to test certain parts of the scale’s operation
for troubleshooting purposes. Available areas for testing include ADC (Analog-to-
Digital Converter) test, keyboard test and display test. This sub-menu also allows
you to key-in the scale’s calibration. Table 5-7 lists the items which are contained in
this sub-menu.
To access the Diagnostics sub-menu, follow the instructions below.
1. From the main menu. Press the * key.
2. Press the Diag soft key. Key-in the password (5555). The sub-menu items are
listed above the six soft keys.