Salter Brecknell 650 - Manual (Page 7)

7
CHAPTER 1:
INTRODUCTION TO THE SALTER BRECKNELL 650 DIGITAL COUNTING SCALE
The Salter Brecknell Model 650 Series Digital Counting Scale is an easy to use, high-resolution
counting scale featuring keyboard tare, average piece weight entry, item ID storage and custom
programmable label formatting. It is equipped with many useful features that are normally found
on much more expensive scale products, including dual-channel, memory accumulator and set
point target values (under/target/over).
Options include three 5V TTL outputs and a rechargeable battery for portable applications.
The scale is available in four avoirdupois weight capacities. There are five units of measure
available. Table 1-1 shows the 650 series product matrix.
Prior to using the scale, please read this user’s guide carefully and completely. Store the manual
in a safe and convenient place so it will be available if you have questions concerning the
operation of the scale.
OVERVIEW
Installation and wiring instructions for a remote scale are found in Appendix D. The scale contains
two main setup menus - the Service Menu and the Supervisor Menu. The Service Menu
configures the scale to your remote weigh platform. The Supervisor Menu configures the serial
communication ports and enables user options. Chapter 5 covers both menus in detail. Chapter 6
covers system calibration. Prior to installing the scale, please read this manual carefully and
completely. Store the manual in a safe and convenient place so it will be available if you have
questions concerning the setup and operation of the scale.
MODEL POUNDS KILOGRAMS GRAMS OUNCES
650-12 12 x .001 lb 6 x 0.0005 kg 6000 x 0.5 g 192 x 0.02 oz
650-30 30 x .002 lb 15 x 0.001 kg 15000 x 1 g 480 x 0.05 oz
650-60 60 x .005 lb 30 x 0.002 kg 30000 x 2 g 960 x 0.1 oz
650-120 120 x .01 lb 60 x 0.005 kg 60000 x 5 g 1920 x 0.2 oz
TABLE 1-1: 650 Series Product Matrix
FIGURE 1-1: 650 Series Front Panel