Salter Brecknell 650 - Manual (Page 41)

41
APPENDIX C: ERROR MESSAGES
C.1 ERROR MESSAGES
If the scale encounters an error condition, it will display a message alerting the operator. A
description of each display follows:
C.1.1 OPERATOR ERRORS
Message Explanation
Maximum Scale Weight
Exceeded
Indicates that the weighing capacity of the selected scale has
been exceeded.
Not Enough Resolution Indicates that there is not enough internal resolution to
calculate the unit weight of an item. This means that the
items you are counting are too light for the scale to
process at all.
Unit Weight too Light Indicates that unit weight of the items you are sampling
or manually entering is too light for the scale to process
accurately.
Sample Weight too Light Indicates that total weight of the items you are sampling
is too light for the scale to process accurately.
Invalid Tare Value Entered Indicates that the tare weight value you are entering is
not rounded to the nearest scale division. For example,
you cannot enter 0.01 lb for a 0.05 lb increment scale.
Value Exceeds the Scale
Capacity
Indicates that the tare weight value or unit weight value
you are entering exceeds the capacity of the scale.
Remote Scale Error – Cannot
Switch
Indicates that there is a problem with the remote scale
or the remote scale has been disconnected.
Remote Scale Disabled Indicates that the remote scale is disabled. Occurs
when you press the Local / Remote key.
No Such ID in System Indicates that the ID number you have entered or
scanned does not exist in the scale.
No Pieces for Accumulating Occurs when you press the M+ soft key with nothing on
the scale platform.