ClearSounds TALK500 ER - Manual (Page 11)

10 – ENGLISH 11 – ENGLISH
rings simply press the red activation button on your pendant,
the call will be answered and you will be able to talk using
the speakerphone. To disconnect the call simply press the red
activation/deactivation button. Be careful not to hold the button
for too long or you will activate the emergency call program. If
there is no response from the 1 st emergency call, or if the 1 st
caller does not press the numbers 1 and 2 sequentially to cancel
the SOS function, the phone will dial the next number.
• If you do not record a message, the phone will announce the default
emergency message when you press SoS or the pendant.
• If the emergency calls receive no response, the phone automatically
redials the numbers 10 minutes later.
THE pHoNE BooK
Important: When using the phone book features, please note it is
only available at phone book mode ( icon turns on). If the  icon
is off, press button once. Do NOT program 9-1-1 in the phone
book.
Storing numbers in the phone book
1 press and release the MENU button until STORE NUMBER appears.
2 press the DIAL button. The cursor will flash in the first position.
3 Enter the phone number you want stored with a maximum of 22
digits using the number pad and confirm with DIAL button.
4 Enter the name (maximum of 16 letters) and press DIAL. press
or , to select EMERGENCY ON/OFF. press DIAL again to save
if you are selecting OFF. If you want to select EMERGENCY ON,
press or , then press DIAL.
5 The display now shows the location number where the emergency
number is stored. press DIAL again to save the location.
6 The display then shows SAVED.
7 The display now shows number and NAME RECORDING.
8 To record voice, hold down DIAL button, speak clearly into
speakerphone after a beep and “VoICE” icon flashing. Release the
button when you are finished or the unit will stop recording after
3 seconds. The voice prompt will then be played automatically.
9 You can repeat step 2 to 6 to enter more numbers or press button
to exit.
Note: When the memory location is full, FULL will displayed.
How To Enter Names
The number buttons are also inscribed with letters for entering the
Talk500ER-Trilingual.indd 11 5/13/08 8:39:09 AM